Wearhaus Arc User Guide

Welcome to your Wearhaus Arc! We're excited to have you as part of the Wearhaus community. On this page, you'll find a breakdown of all of your Arc's unique features and how to use them.

For more details and troubleshooting tips, visit our help center.

 

 

Connecting your Arc

  1. Press and hold the button on the left side of your Arc. After 3 seconds, your Arc should power on. You should hear it say, “Power on”.

  2. Continue holding down the power button. After 5 more seconds, your Arc will say, “Pairing mode”.

  3. Open the Bluetooth menu on your device, and tap on “Wearhaus Arc” when viewing the list of devices. Your Arc should say, "Device connected" once it is successfully connected to your device.

 

Download the Wearhaus App

To get the best possible experience, we recommend downloading the Wearhaus App. Our app provides finer controls over your Arc's sharing, audio, and light settings. It also integrates with Apple Music and Spotify so you can listen to your playlists with friends.

   

 

Basic Playback Controls

The right side of the Arc is a touch-sensitive control panel that responds to your taps and swipe gestures.

  • Tap: Play and pause.
  • Swipe Forward: Skip to next song
  • Swipe Backward: Go back to beginning of song or the previous song.
  • Swipe Up: Increase volume.
  • Swipe Down: Decrease volume.

If you would like to disable the touch controls, you may do so from the "Settings" tab in the Wearhaus App.

 

    Audio Sharing with the Arc

    If you and a friend both have a Wearhaus device, you can sync them up and play audio from one source to listen to music or watch movies together. This is great for exercise groups, creative collaboration, and travel.

    Mobile App (Broadcasting and Joining)

    On the mobile app, navigate to the "Home" tab to control the audio sharing. Tap "Broadcast" to start sharing your audio with people around you. Tap the "Scan" or "Refresh" button to search for nearby devices and see what they're listening to. If a device pops up on the search results, you can tap it to join the station.

    Broadcasting with Touch Controls

    1. Press and hold on the touch panel until you hear your Arc say "Ready to share" (about 5 seconds).
    2. Swipe forward to begin broadcasting. You should hear your Arc say "Broadcasting" and the light ring will begin spinning red/blue.

    Joining In with Touch Controls

    1. Press and hold on the touch panel until you hear your Arc say "Ready to share" (about 5 seconds).
    2. Swipe backward to begin searching for nearby broadcasters. You should hear your Arc say "Scanning" and the light ring will begin spinning red/blue.
    3. After a few seconds, if your Arc finds a broadcaster, it will say "Device connected" and the light ring will change colors to match the broadcaster.

     

    Light Ring Controls

    Mobile App

    Navigate to the "Color" tab on the mobile app. There, you can set the color you want using a full RGB-spectrum ring. You can also toggle settings like multi-color, matching album artwork, and pulsing to the music.

    Touch Controls

    1. Double-click the power button to enter color changing mode. You should hear your Arc say, "Color changing mode."
    2. Swipe forward/backward to cycle between colors. Swipe up/down to adjust the brightness.
    3. Double-click the power button again to confirm your color selection. You should hear your Arc say, "Color saved."