Wearhaus Beam User Guide

Welcome to your Wearhaus Beam! We're excited to have you as part of the Wearhaus community. On this page, you'll find a breakdown of all of your Beam's unique features and how to use them.

For more details and troubleshooting tips, visit our help center.

 

 

Connecting your Beam

  1. Press and hold the middle (play/pause) button on the right control box. After 3 seconds, your Beam should power on. You should hear it say, “Power on”.

  2. Continue holding down the middle button. After 5 more seconds, your Beam will say, “Pairing mode”.

  3. Open the Bluetooth menu on your device, and tap on “Wearhaus Beam” when viewing the list of devices. Your Beam should say, "Device connected" when successfully connected.

 

Download the Wearhaus App

To get the best possible experience, we recommend downloading the Wearhaus App. Our app provides finer controls over your Beam's sharing, audio, and light settings. It also integrates with Apple Music and Spotify so you can listen to your playlists with friends.

  

 

Basic Playback Controls

  • "+" Button: Tap to increase volume. Hold to skip the current song.
  • Middle Button: Tap to play/pause. Hold to power on/off.
  • "—" Button: Tap to decrease volume. Hold to go backwards.

 

    Audio Sharing with the Beam

    If you and a friend both have a Wearhaus device, you can sync them up and play audio from one source to listen to music or watch movies together. This is great for exercise groups, creative collaboration, and travel.

    Mobile App (Broadcasting and Joining)

    On the mobile app, navigate to the "Home" tab to control the audio sharing. Tap "Broadcast" to start sharing your audio with people around you. Tap the "Scan" or "Refresh" button to search for nearby devices and see what they're listening to. If a device pops up on the search results, you can tap it to join the station.

    Broadcasting with Button Controls

    1. Double-tap the middle (play/pause) button. You should hear the Beam say "Ready to share"
    2. Tap the "+" button to begin broadcasting. You should hear the Beam say "Broadcasting" and the light ring will begin spinning red/blue.

    Joining In with Button Controls

    1. Double-tap the middle (play/pause) button. You should hear the Beam say "Ready to share"
    2. Tap the "--" button to begin scanning for nearby broadcasters. You should hear the Beam say "Scanning" and the light ring will begin spinning red/blue.
    3. After a few seconds, if your Beam finds a broadcaster, it will say "Device connected" and the light ring will change colors to match the broadcaster.

     

    Light Ring Controls

    Mobile App

    Navigate to the "Color" tab on the mobile app. There, you can set the color you want using a full RGB-spectrum ring. You can also toggle settings like multi-color and matching album artwork.

    Button Controls

    1. Press and hold the "+" and "--" buttons simultaneously for 3 seconds. You should hear the Beam say, "Color changing mode."
    2. Tap the "+" or "--" buttons to cycle between colors. Hold the "+" or "--" button down to adjust the brightness up and down.
    3. Tap the middle button to confirm. You should hear the Beam say, "Color saved."